Protecting People, Industry, and Environment
Cerex systems are state-of-the-art instruments that can detect air pollutants such as benzene, mercury, sulfur dioxide, ammonia, and chemical warfare agents on a real time basis.
Open Path and Fenceline Analyzers
Monitor fugitive gases up to 1km around the fence line of your facility with cost-effective UV-DOAS and FTIR analyzers
Survey Site Emissions, Perimeter Leak Detection, Detection of Ambient Gas Levels
Cerex open path analyzers use spectroscopy technology to detect compounds in the open air over hundreds of meters. For decades, the UV Sentry (using UV-DOAS technology) and the Air Sentry FTIR (using FTIR technology) have helped government, industry, and communities monitor fugitive emissions with reliability, accuracy, and extreme sensitivity.
Portable Point Analyzers
Local Area Sampling and Point Leak Detection
Cerex portable point analyzers intake surrounding air via a sample port. Spectroscopy technology inside the analyzer then identifies ambient gases within the sample and determines the concentration in real-time. The UV Hound, Shepherd FTIR, and Cerex FTIR have helped emergency personnel, hospitals, government agencies, and others quickly determine the toxicity and safety of their environments.
Micro Hound
Best portable detection for
Benzene, Hydrogen Sulfide, and more
Recommended for
Targeting key compounds within UV spectrum
UV Hound
Laboratory sensitive detection for
Benzene, Hydrogen Sulfide, and more
Recommended for
Targeting key compounds within UV spectrum
Shepherd FTIR
Laboratory sensitive detection for Nitrous Oxide, Chlorine Dioxide, and more
Recommended for
Targeting compounds across IR spectrum
Fixed Installations & Emissions Systems
Analyzing Stacks or Process Streams
Cerex’s multi-gas analyzers use cross-stack, in-situ, or extractive monitoring methods to identify and measure the contents of emissions from industrial stacks.
They can also be configured into virtually any process monitoring application within refineries, chemical plants, and more.
CEMS / Stack
UV 3000 Series
UV 3000, UV 3000P, UV3000C-RM
- UV-DOAS based Continuous Emissions Monitoring
- Cross stack, In-Situ probe and Parallel cell models available
- Combustion gases, BTEX, SVOC’s, chlorine, ammonia, and more
- Application specific configurations
FT 5000 Series
FT 5000P, FT 5000C, FT 5000C-RM
- FTIR-based Continuous Emissions Monitoring
- Cross stack, Probe based, and UVDOAS FTIR hybrid systems
- 400 available compounds
- Operational range in ppb, ppm, and higher
- Extractive Process Monitoring, Ambient Point Monitoring
Aeres-XL
(In-Situ)
- UV-DOAS based Continuous Emissions Monitoring
- Application specific configurations
- Operational range in ppb, ppm, and higher
Process Monitoring
UV 3000 Series
UV 3000F, UV 3000XF
Rack mount chassis or NEMA enclosure with a variety of options including internal and external sample cells, and fiber coupling options
- Combustion gases, BTEX, SVOC’s, chlorine, ammonia, and more
- In-situ or Extractive process monitoring models
- Ambient and mobile laboratory monitoring
Accessories
Retroreflectors, Sample Cells, and more
Retroreflector
Used with Open Path analyzers. A Cerex Retroreflector is designed to receive UV light (from a UV Sentry) or Infrared light (from an Air Sentry FTIR) and then reflect the light along the original beam path into the respective instrument.
Sample Conditioner
ETG permeation sample conditioning systems are designed to prepare hot gas sample streams for high flow, high performance gas monitoring applications.
The ETG permeation system will remove particulates, mists & water vapor from a gas stream without the loss of analyte gasses.
0.33m Gas Probe
Use this hand held gas probe to pinpoint the source of a leak or submerse the probe to determine exhaust gas concentrations.
1.0m Gas Probe
For applications requiring lower detection limits, the 1.0m Gas Probe is the preferred choice. Its longer path length coupled with its small size produces detections in the most confining spaces.
Mini Retroreflector
Use this mini-retroreflector to help align and calibrate an open-path system or for general experimentation.
Corner Cube Array
Cerex supplies portable corner cube arrays with 7, 30, and 60 elements. For long distance applications 90 and 120 element arrays are available for permanent installations. Arrays can have IR or UV coatings.
Large Flat Mirrors
Cerex supplies large flat mirrors for guiding open-path beams through multiple rooms. These mirrors can be coated for UV or IR use.
Transfer Optics
Cerex provides custom fabrication of transfer optics for your specific application.
Gas Cells
QA Cell
Linear Cells
Cerex offers custom length linear cells for gas sampling. The cells can be fiber coupled or windowed for your application. We offer cell bodies made from glass, aluminum, or stainless steel.
Multi-Pass Cells
Cerex offers multi-pass cells with 1m, 2m, 2.5m, 5m, 10m, 20m, and 30m path lengths for use with UV or IR. The cells can be fiber coupled or combined with transfer optics to mate to an existing system. We offer cell bodies made from glass or stainless steel.
Software and Technology
Within the broad landscape of gas detection methodologies, Cerex's technology uses optical techniques to measure gas phase compounds
Continuous Monitoring Software (CMS)
Cerex analyzers use Continuous Monitoring Software (CMS) for analytical and data logging functions as well as to provide a user interface for the analyzer.
Running in the familiar Windows® operating system, CMS file storage architecture and controls are as intuitive as operating a personal computer.
Technologies
More details coming soon